\r\n Use the arrow keys or click on the blue arrow buttons for navigation\r\n
\r\n1. Allow the meter to warm up for at least 20 minutes after applying power.
\r\n\r\n\r\n 2. Run the process fluid through the sensor until the sensor temperature reaches the\r\n normal process operating temperature.\r\n
\r\n\r\n\r\n 3. Stop flow through the sensor by shutting the downstream valve, and then the upstream\r\n valve if available.\r\n
\r\n\r\n\r\n 4. Verify that the sensor is blocked in, that flow has stopped, and that the sensor is\r\n completely full of process fluid.\r\n
\r\n \r\n }\r\n />\r\n );\r\n}\r\n\r\nexport default ZeroVerContinuation;\r\n","import React, {useCallback, useContext, useEffect} from 'react';\r\nimport useKeyPress from '../../../hooks/useKeyPress';\r\nimport BodyContentView from '../../views/bodyContentView';\r\nimport {useMenu} from '../../../hooks/useMenu';\r\nimport ZeroVerContinuation from './zero-ver-continuation';\r\nimport CommandsContext from '../../../context/commandsContext';\r\n\r\nfunction ZeroVerification({onExit}) {\r\n const leftPress = useKeyPress('ArrowLeft');\r\n const rightPress = useKeyPress('ArrowRight');\r\n const {selected, onComponent} = useMenu();\r\n const {onUpdateCommands} = useContext(CommandsContext);\r\n\r\n const onRight = useCallback(() => {\r\n onExit();\r\n onComponent(1. Allow the meter to warm up for at least 20 minutes after applying power.
\r\n\r\n 2. Run the process fluid through the sensor until the sensor temperature reaches the\r\n normal process operating temperature.\r\n
\r\n\r\n 3. Stop flow through the sensor by shutting the downstream valve, and then the upstream\r\n valve if available.\r\n
\r\n\r\n 4. Verify that the sensor is blocked in, that flow has stopped, and that the sensor is\r\n completely full of process fluid.\r\n
\r\nBegin zero calibration?
\r\n \r\n }\r\n />\r\n );\r\n}\r\n\r\nexport default ZeroCalSave;\r\n","import React, {useState, useEffect, useCallback, useContext, useRef} from 'react';\r\nimport CommandsContext from '../../../context/commandsContext';\r\nimport MenuContext from '../../../context/menuContext';\r\nimport ValuesContext from '../../../context/valuesContext';\r\nimport useKeyPress from '../../../hooks/useKeyPress';\r\nimport {useMenu} from '../../../hooks/useMenu';\r\nimport NumberEntryView from '../../views/numberEntryView';\r\nimport ZeroCalibration from './zero-calibration';\r\nimport ZeroCalSave from './zero-CalSave';\r\n\r\nfunction ZeroTime({onExit}) {\r\n const leftPress = useKeyPress('ArrowLeft');\r\n const rightPress = useKeyPress('ArrowRight');\r\n const [value, setValue] = useState(20);\r\n const {onUpdateCommands} = useContext(CommandsContext);\r\n const {values, onUpdateValues} = useContext(ValuesContext);\r\n const {selected, onComponent} = useContext(MenuContext);\r\n const inputRef = useRef();\r\n\r\n const onLeft = useCallback(() => {\r\n onComponent(1. Check for two-phase flow.
\r\n2. Verify wiring between the transmitter and the sensor.
\r\n3. Check the test points and sensor coils.
\r\n4. Purge the sensor tubes.
\r\n \r\n }\r\n />\r\n );\r\n}\r\n\r\nexport default SensorError;\r\n","import React, {useCallback, useContext, useEffect} from 'react';\r\nimport BodyContentView from '../../views/bodyContentView';\r\nimport useKeyPress from '../../../hooks/useKeyPress';\r\nimport CommandsContext from '../../../context/commandsContext';\r\nimport {useMenu} from '../../../hooks/useMenu';\r\nimport Info from '.';\r\n\r\nfunction SensorTemp({onExit}) {\r\n const leftPress = useKeyPress('ArrowLeft');\r\n const {onUpdateCommands} = useContext(CommandsContext);\r\n const {onComponent} = useMenu();\r\n\r\n useEffect(() => {\r\n if (!leftPress) return;\r\n\r\n onLeft();\r\n }, [leftPress]);\r\n\r\n const onLeft = useCallback(() => {\r\n onComponent(1. Check the wiring between the sensor and the transmitter.
\r\n\r\n {' '}\r\n a. Refer to the installation manuals and ensure that the wiring has been performed\r\n according to instructions. Obey all applicable safety messages.\r\n
\r\nb. Verify that the wires are making good contact with the terminals.
\r\nc. Perform RTD resistance checks and check for shorts to case.
\r\nd. Check the continuity of all wires from the transmitter to the sensor.
\r\n2. Check your process conditions against the values reported by the meter.
\r\n3. Contact Micro Motion.
\r\n \r\n }\r\n />\r\n );\r\n}\r\n\r\nexport default SensorTemp;\r\n","import React, {useCallback, useContext, useEffect} from 'react';\r\nimport BodyContentView from '../../views/bodyContentView';\r\nimport useKeyPress from '../../../hooks/useKeyPress';\r\nimport CommandsContext from '../../../context/commandsContext';\r\nimport Info from '.';\r\nimport {useMenu} from '../../../hooks/useMenu';\r\n\r\nfunction SensorCase({onExit}) {\r\n const leftPress = useKeyPress('ArrowLeft');\r\n const {onUpdateCommands} = useContext(CommandsContext);\r\n const {onComponent} = useMenu();\r\n\r\n useEffect(() => {\r\n if (!leftPress) return;\r\n\r\n onLeft();\r\n }, [leftPress]);\r\n\r\n const onLeft = useCallback(() => {\r\n onComponent(1. Check the wiring between the sensor and the transmitter.
\r\n\r\n a. Refer to the installation manuals and ensure that the wiring has been performed\r\n according to instructions. Obey all applicable safety messages.\r\n
\r\nb. Verify that the wires are making good contact with the terminals.
\r\nc. Perform RTD resistance checks and check for shorts to case.
\r\nd. Check the continuity of all wires from the transmitter to the sensor.
\r\n\r\n 2. Check your process conditions against the values reported by the meter. Temperature\r\n should be between -200 °F and +400 °F.\r\n
\r\n\r\n 3. Verify that all of the characterization parameters match the data on the sensor tag.\r\n
\r\n4. Contact Micro Motion.
\r\n \r\n }\r\n />\r\n );\r\n}\r\n\r\nexport default SensorCase;\r\n","import React, {useState, useEffect, useRef, useContext, useCallback} from 'react';\r\nimport useKeyPress from '../../../../../hooks/useKeyPress';\r\nimport {numbers, specialCharTextNumbers} from '../../../../views/textNumber-input/text-number';\r\nimport TextNumberEntryView from '../../../../views/textNumberEntryView';\r\nimport NumberView from '../../../../views/numberTNView';\r\nimport MenuContext from '../../../../../context/menuContext';\r\nimport ValuesContext from '../../../../../context/valuesContext';\r\n\r\nfunction D1FluidTN({onExit, isDisabled}) {\r\n const [value, setValue] = useState(10);\r\n const {selected, setDisableMenu} = useContext(MenuContext);\r\n const {values, onUpdateValues} = useContext(ValuesContext);\r\n\r\n const onRightHold = useCallback(\r\n result => {\r\n setDisableMenu(true);\r\n onExit();\r\n onUpdateValues(selected.id, result);\r\n setTimeout(() => setDisableMenu(false), 500);\r\n },\r\n [value],\r\n );\r\n\r\n return (\r\n| Tag | \r\n0x19, 0x4B | \r\n
| Transmitter Software | \r\n2.00 | \r\n
| Enhanced Core | \r\n4.60 | \r\n